Lenovo ThinkServer TD340 User Manual And Hardware Maintenance Manual page 171

5. Press down the small handle on the microprocessor socket, and then pull the handle a little bit outward
to release it from the secured position. Then, gently press the microprocessor retainer to open it. Ensure
that the small handle and the microprocessor retainer are in the fully open position.
Figure 98. Opening the handle and microprocessor retainer
6. Remove the plastic microprocessor socket cover. Store the microprocessor socket cover in the event
that you later remove the microprocessor and need the socket cover to protect the pins on the socket.
Note: Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must
be kept as clean as possible.
Figure 99. Removing the microprocessor socket cover
7. Touch the static-protective package that contains the new microprocessor to any unpainted surface on
the outside of the server. Then, remove the new microprocessor from the package.
.
Chapter 6 Installing, removing, or replacing hardware
159