Projector Configuration; Which Configuration Can Be Used; Positioning The Projector - Barco R9002400 Installation Manual

Projector Configuration

Which configuration can be used.

The projector can be installed to project images in four different configurations (image 1):
rear/ceiling,
rear/table,
front/ceiling or
front/table.
5HDU&HLOLQJ
)URQW&HLOLQJ
image 1

Positioning the Projector

The projector should be installed perpendicular with the screen on a distance PD and water leveled in both directions.
The mounting positions shown in following images are shown for a nominal lens position.
U hi yrU ‚ƒÃ†vq rÃshpv t Ãprvyv t
Projector
A
CD
CD = SH/2 + B - A
SH
Definitions of the Abbreviation on drawings
B = Distance between ceiling and top of the screen or between floor and bottom of the screen.
A = Distance from the middle of the lens (in nominal position) to bottom side of the projector.
CD = Total distance between projector and ceiling or projector and floor.
SW = Screen width.
SH = Screen height (image height).
PD = Projector Distance, distance between screen and projector.
5976195 BARCOCINE 9 31012002
5HDU7DEOH
)URQW7DEOH
SIDE VIEW
Screen
SH
Optical axis projection lens
PD
B
Floor
SW
Screen
TOP VIEW
SW
Floor
BACK VIEW
8 rvyv t U ‚ ƒÃ†vq rÃshpvt Ãsy‚ ‚…
CD
A
Optical axis projection lens
Projector
CD = SH/2 + B - A
SIDE VIEW
CEILING VIEW
Ceiling
SH
SW
BACK VIEW
Installation guidelines
Ceiling
B
PD
SH
Screen
SW
Screen
3-3