Sending A Fax Using Shortcuts; Customizing Fax Settings; Changing The Fax Resolution - Lexmark X790 Series User Manual

Faxing
Notes:
•
The Fax option is available for use only with the PostScript driver or the Universal Fax Driver. For information on
installing these drivers, see the Software and Documentation CD.
•
The Fax option must be configured and enabled in the PostScript driver under Configuration tab before it can be
used.
•
If the Always display settings prior to faxing check box is selected, then you will be prompted to verify the
recipient information before the fax is sent. If this check box is not selected, then the queued document will be
sent automatically as a fax when you click OK on the Fax tab.

Sending a fax using shortcuts

Fax shortcuts are just like the speed dial numbers on a telephone or fax machine. A shortcut number (1–99999) can
contain a single recipient or multiple recipients.
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not place postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
Press , and then enter the shortcut number using the keypad.
4
Touch Fax It.

Customizing fax settings

Changing the fax resolution

Settings range from Standard (fastest speed) to Ultra Fine (slowest speed, best quality).
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
From the home screen, navigate to:
Fax > enter the fax number > Options
4
From the Resolution area, touch the arrows to change to the resolution you want.
5
Touch Fax It.
115