Pattern Functions - Pattern Begin/End - Bernina 880 PLUS Workbook

My BERNINA

PATTERN FUNCTIONS - PATTERN BEGIN/END

Firm woven fabric, 4" x 6"*
Lightweight tear-away stabilizer 4" x 6"*
80/12 Universal
Polyester or cotton embroidery thread
Default
Open Embroidery Foot #20/20C/20D
NOTE: Refer to Page 56 Reference-Decorative Stitching for
more tips on appropriate tools for decorative stitching.
B E R N I N A S E W I N G M A C H I N E W O R K B O O K
1. Attach Open Embroidery Foot #20/20C/20D. Select the
appropriate foot in Presser Foot Selection/Display.
2. Place the stabilizer behind the fabric.
3.
Select the satin stitch hearts stitch #413.
4. Sew 2½ patterns, stopping in the middle of the third pattern.
5. Lift the Presser Foot and move the needle down about
an inch; then begin sewing again. The pattern will start
forming where you left off.
6.
After completing the interrupted heart, start the final
heart and press Pattern End. The machine will stop
stitching when the pattern is complete.
Tip: To make sure you have a complete pattern, depress
the foot control and do not lift your foot until the
machine stops.
7. Move to a new position and sew 2½ patterns, stopping
in the middle of the third pattern. Lift the Presser Foot
and move the needle down about an inch.
8. Before starting to sew again, press Pattern Begin.
NOTE: On most models, the Pattern Begin
icon appears on the screen in the Stitch
Altering Area only when the pattern is not at
the beginning. To get to the beginning of the
pattern, select the on-screen Pattern Begin
icon. If it is not visible, then the needle is at
the beginning of the stitch pattern. On the B
790 PLUS, 770 QE PLUS and 735, touch the
button to the left of the screen.
9.
Start sewing; the pattern will start forming at the
beginning. Again, press Pattern End when you start the
final heart.
Do you know how to:
• Recognize the difference between the
icons for Pattern Begin and Pattern End
and know where they are located?
HOW
19