Important Information - Fujitsu SCALEOVIEW S17-2 Operating Manual

Maintaining Units
Deep Cleaning and Detailing
Perform the following deep cleaning and detailing as required - at least once a year. This helps
restore the original color to the painted surfaces.
Perform steps
1
page
water.
Using a new clean white cloth, apply the Nu Finish polish to the cloth and apply the polish to
2
the painted or metal surfaces of the unit.
Note: For difficult-to-remove ground-in dirt, apply Nu Finish polish to the soft bristle nylon
• Do not apply the Nu Finish polish to textured surfaces.
• Do not apply the Nu Finish polish to electronic displays or nozzle boots.
Wipe surface of the unit with a clean white cloth.
3
Remove barricade(s) and cleaning supplies from the unit area.
4
Page 64
1 to 8 on page 63
63, prepare a mixture of one (1) part Concentrated Simple Green cleaner to one (1) part
brush and rub the surface.

IMPORTANT INFORMATION

of the Routine Cleaning procedure except, in step
MDE-3893P Encore® and Eclipse® Series Owner's Manual · December 2011
Special Maintenance Instructions
3 on