Special Maintenance Instructions; Cleaning And Detailing The Unit - Fujitsu SCALEOVIEW S17-2 Operating Manual

Maintaining Units
Gently pull the paper through the module until it is completely removed. Leave no shards of
3
paper in the unit. Check the paper chute and ensure that it is clear. Lower the module back on
the paper bucket and push the right blue pin in place.
Note: You can rotate the gears to release shards.
Figure 5-30: Use Gears to Remove Shards
Place the Printer Control Module back and push the right blue pin back in place.
4

Special Maintenance Instructions

Cleaning and Detailing the Unit

Materials Required
• Safety glasses
• Flexible rubber gloves
• Concentrated Simple Green all purpose cleaner
• Soft bristle nylon brush
• Spray bottle filled with water
• Empty spray bottle (to use with prepared cleaning mixture)
• White cotton cloths
• Nu Finish car polish
• Safety cones or barricades
Important Items to Remember
• Do not use waxes, harsh abrasives, or ammonia containing cleaners on the textured door
• Always use a soft bristle nylon brush and rinse after cleaning.
• Simple Green cleaner is the recommended cleaner for all surfaces.
Page 62
surfaces.
MDE-3893P Encore® and Eclipse® Series Owner's Manual · December 2011
Special Maintenance Instructions
Gears to Release Shards