Encore 550 - Fujitsu SCALEOVIEW S17-2 Operating Manual

Introducing the Encore/Eclipse Series

Encore 550

The Encore 550 unit has an enhanced appearance for the columns and canopy, when compared
to the Encore 300 and 500 units. The following illustration shows an Encore 550 unit with
SMART Meter
to "Programming Encore 500 and 550, Encore S Series and Eclipse" in MDE-4732 Encore and
Eclipse Series Owner's Programming Manual. All options may not be available on your unit.
Figure 3-2: Encore 550 Unit
Serial Number Label is
found inside the CIM
Main Display
Manager's Keypad (not shown)
can be found behind the CIM
Door
CIM Door Lock
CRIND Display
Cash Acceptor
Card Reader
CRIND or PPP Keypad
CRIND Device Printer
Door Lock
Shear Valve,
Unions, and Fuel
Filter behind Lower
Panel (not shown)
Page 8
dispenser and its components. For information on programming the unit, refer
™
The VR hose, nozzle information
and FCC label are found on the
right side when facing Side 1 of
the dispenser.
MDE-3893P Encore® and Eclipse® Series Owner's Manual · December 2011
Encore 550
Breakaway for all Encore units
is located near the hose casting
at the top of the
Pump/Dispenser for units
without Hose Retrievers. For
units with Hose Retrievers, the
breakaway is located near the
Nozzle.
Available but not shown:
- Totalizer Option
- TRIND Option
- Scanner Option
PPU Display and Grade
Select Buttons
Boot Area
Nozzle (not shown)
Brand Advertising Panel
Lower Panel