Fujitsu SCALEOVIEW S17-2 Operating Manual page 58

Maintaining Units
Place the new roll of paper in the paper bucket. For orientation, see
4
Figure 5-18: Feeding Paper into the Printer
Feed the paper into the printer inlet following the direction of arrows on the printer.
5
Note: If the gears rattle when loading the paper, press trigger and feed the paper
The paper will automatically feed through the printer after the initial feed is done manually.
Page 54
CAUTION
Prevent your fingers or hair from coming into contact with the gears on the side of
the printer, as it could result in an injury.
simultaneously.
MDE-3893P Encore® and Eclipse® Series Owner's Manual · December 2011
Periodic Maintenance Requirements
Figure 5-18.
Feed the paper into
the printer as shown
Gears on the Side of
the Printer
Right Blue Pin