Controlling Access To The Wireless Network; Changing The Access Controls For A Wlan - Ruckus Wireless ZoneFlex 2741 User Manual

Controlling Access to the Wireless Network

Access Control give you control over which stations are allowed to join (associate with)
your WLAN networks. There are "tab" entries for each available WLAN.

Changing the Access Controls for a WLAN

1. Go to Configuration > Access Controls. The Configuration :: Access Controls
page appears.
2. Click the tab for the WLAN you want to configure.
3. Select the radio button for the desired access control. (For a description of the
options, see"Changing the Access Controls for a WLAN"
The Access Controls Table appears.
4. Click Add new entry to add a MAC address to the table.
5. Type the MAC address in the spaces provided.
6. Click Update to save your changes. Assuming all parameters you entered are
acceptable, that row will be added to the table.
You have completed adding an entry to the MAC address table. If you have additional
MAC addresses you want included, click Add new entry, and then repeat these steps
until you have entered all the stations you want. There is a limit of 128 rows.
Figure 49. Access control settings
Configuring the Access Point
Controlling Access to the Wireless Network
in the previous section.)
75