Configuring the Access Point
Controlling Access to the Wireless Network
5. Set the maximum Downlink and Uplink rate per station, or leave disabled if you
do not want to limit traffic rate per station in that direction.
6. The table below updates to show the maximum transfer rates for each traffic type.
7. Click Update Settings to save your changes.
Figure 38.
Limit traffic rate per station on a particular WLAN
Controlling Access to the Wireless Network
Access Controls give you control over which stations are allowed to join (associate
with) your WLAN networks. There are "tab" entries for each available WLAN.
Changing the Access Controls for a WLAN
1. Go to Configuration > Wireless.
NOTE: If you are using a ZoneFlex 7363/7762/7962 AP, go to Configuration > Radio
2.4G or Configuration > Radio 5G.
2. Click the Wireless # tab for which you want to configure the access control
settings.
3. Click the Edit Settings button after Access Control. The Configuration :: Wireless
:: Access Control :: Wireless # page appears.
74