Using Wep - Ruckus Wireless ZoneFlex 2741 User Manual

Figure 45. WLAN settings

Using WEP

Do not customize these options unless you are an experienced network
CAUTION:
administrator or are under the guidance of an IT/support professional.
To configure WLAN-specific WEP encryption settings
1. Go to Configuration > Wireless. The Configuration :: Wireless :: Common page
appears.
2. Click the Wireless # tab that you want to configure. The Configuration :: Wireless
:: Wireless[#] page appears.
3. Click the Encryption Method menu, and then click WEP. An additional set of WEP-
specific encryption options appear on this page.
4. Review the encryption settings listed in
required.
Configuring the Access Point
Configuring WLAN Settings
Table 11, and then make changes as
69