Verifying The Installation; Associate A Wireless Client With The Access Point - Ruckus Wireless ZONEFLEX 2741 Getting Started Manual

Verifying the Installation

Associate a Wireless Client with the Access Point

Figure 27.
You have completed connecting the Access Point to the administrative computer and a
power source.
7
Verifying the Installation
Ruckus Wireless strongly recommends that you verify that the Access Point is operating
correctly and that wireless clients are able to associate with it before you mount the unit.
Perform the following tasks to verify the installation.
Associate a Wireless Client with the Access Point
1. On the administrative computer, verify that the wireless interface is enabled. On
Windows XP, click All Programs > Connect To > Wireless Network Connection to
enable the wireless interface.
2. In the system tray, right-click the
click View Available Wireless Networks.
3. In the list of available wireless network, click the network with the same SSID as you
configured in
SSID to Ruckus Wireless AP, click the wireless network named Ruckus Wireless AP.
40
Fasten the bottom cover using three machine screws
"Configure Wireless # Settings"
(Wireless Network Connection) icon, and then
on page 21. For example, if you set the