Display Panel Description; Figure 5: M2000 Series Led Display Panel; Table 1: Led Display – Device Status Led Behavior Definition - RuggedCom RuggedSwitch M2100 Installation Manual

3.3 Display Panel Description

The M2000 series products are equipped with a versatile display panel, shown in Figure 5, which is
designed to provide quick status information for each port, as well as the entire device to allow for
simple diagnostics and troubleshooting. It features:
• RS232 console port for 'out of band' console access and configuration
• Power supply and Alarm status indicators
• Convenient port status indicators conveying Link-Activity, Duplex, or Speed via push-
button control.
• System reset via push-button if held for 5 seconds

Figure 5: M2000 Series LED Display Panel

Device status LEDs exist to provide a quick visual indicator to operators for operational status of
the unit. Table 1 defines the possible LED colours and the corresponding description.
LED Colour
Green
PS1 / PS2
Red
Off
Red
Alarm
Off
Table 1: LED Display – Device status LED behavior definition
©
2008 RuggedCom Inc. All rights reserved
Description
Power supply operating normal
Power supply failure
No power supply installed
Alarm exist – login to console to determine alarm code
No alarms exist
9
Rev106