[362]-[363]
[362] ARS Dial Tone Pattern Selection
Selects the dial tone pattern, Disable (no tone), Tone1, Tone2 or Tone3, generated after
seizing an ARS exchange line. The ARS feature is enabled on an exchange line basis in
program [350] "ARS Selection". The tone will stop after the first digit (except for an
account code) is dialled.
Tone1:
Tone2:
Tone3:
3
6
Default
• Feature Reference
Section 3, Features
Automatic Route Selection (ARS)
[363] ARS Interdigit Time
Assigns the interdigit timer (in seconds) used while the system is checking the dialled
number for the ARS feature.
6
3
Default
!
• This assignment should be the same as the interdigit timer assigned in program [208]
!
"Interdigit Time".
• Feature Reference
Section 3, Features
Automatic Route Selection (ARS)
4-40
System Programming
1 s
2
NEXT
SELECT
(Disable/Tone1/
Tone2/Tone3)
Tone1
time
3
NEXT
(1···20)
5 seconds
4.2
System Programming
STORE
END
STORE
END