[614]
[614] Internal Pulse Detection
Enables or disables connecting a single line telephone (SLT) to receive pulse signals for each
extension.
6
1
* Extension port number: 01 through 24 /
Default
!
• If you select "MODE 1" in program [207] "Recall Timing Range Selection" and "Enable"
!
in this program, the system will distinguish between a pulse signal and hooking depending
on the situation. When you select "Disable" in this program, if "1" is dialled during the
pulse mode, the system will regard it as hooking and all other numbers will be disregarded.
• Feature Reference
Section 3, Features
Recall Button on a Single Line Telephone
4-76
System Programming
extension port no.*
4
NEXT
(01···24/
All extension ports – Enable
4.2
System Programming
or
PREV
NEXT
SELECT
)
(Enable/
Disable)
SELECT
(All extension ports)
To continue
STORE
END
To continue