Dtmf Integration For Kx-Tvp100 - Panasonic KX-TA624 Installation Manual

[103]

[103] DTMF Integration for KX-TVP100

Enables or disables the system to send codes (DTMF signals) to the extension(s) assigned as
the Voice Mail Port in program [102] "Voice Mail Port". These DTMF signals indicate the
state of the call (busy, answered, ringing, disconnected, etc.) in addition to the normal call
tones. They also enable the Panasonic Voice Processing System (VPS) equipment
(KX-TVP100) to immediately recognise the current state of the call and speed up the call
handling.
1
Default
• The table on next page describes the codes (DTMF signals), call state and conditions for
!
!
the DTMF integration operation.
• Select "Plan 1" or "Plan 2" in program [009] "Extension Number Assignment", and select
"Enable" in this program to enable the DTMF integration.
• This feature greatly improves the performance of the Panasonic KX-TVP100: Voice
Processing Systems which have been programmed for Inband Signalling. For more
information about Inband Signalling, refer to your Voice Processing System manual.
• Feature Reference
Section 3, Features
Voice Mail Integration for KX-TVP100
DTMF signals
Code
1
2
3
4
5
6
7
8
9
#9
4-16
System Programming
3
0
NEXT
(Enable/Disable)
Disable
Call State
Ringback Tone When an extension a VPS has dialled is ringing.
Busy Tone When an extension a VPS has dialled is busy.
Reorder Tone When a VPS dials an invalid extension number or when a VPS
is accidentally connected to another Voice Mail Port.
DND When an extension a VPS has dialled sets the DND (Do Not
Disturb) feature.
Answer When an extension which a VPS has dialled answers the call.
Forwarded to When a called extension is forwarded to a VPS, the call can be
Voice Processing forwarded to another available VPS. In this way, the first VPS,
System typically an Auto-Attendant, can release the call to another
(Ringing) VPS and receive another incoming call.
Forwarded to When a called extension is forwarded to a VPS and no VPSs
Voice Mail (Busy) are available to receive the call.
Forwarded to When a called extension is forwarded to another, non-VPS
Extension extension.
Confirmation Tone When a VPS has successfully turned a message waiting lamp
on or a message waiting lamp off.
Disconnect When the calling party disconnects.
4.2 System Programming
STORE
SELECT
Conditions
END