4.2
System Programming
[605] Account Code Entry Mode
Selects the account code input mode, Option, Forced, Verify–All or Verify–Toll (Call
Barring), for each extension port. This feature displays the account code of the called or
calling party on the SMDR.
Option:
Forced:
Verify–All: The user must always enter an assigned account code in program
Verify–Toll (Call Barring): The user can enter an assigned account code in program
6
0
* Extension port number: 01 through 24 /
Default
• Feature References
Section 3, Features
Account Code Entry, Call Barring Override by Account Codes
The user can enter any account code, if needed.
The user must always enter an account code. The code can be any number.
[310] "Account Codes" to make an outside call.
[310] to override call barring. The call barring COS
numbers 3 through 5 will be changed temporarily to the
COS number 2. (The COS numbers 1 and 2 will not be
changed.)
extension port no.*
5
NEXT
(01···24/
All extension ports – Option
or
PREV
NEXT
To continue
SELECT
STORE
)
(Option/Forced/
Verify-All/Verify-Toll)
To continue
SELECT
(All extension ports)
System Programming
[605]
END
4-71