Dtmf Time; No Dial Disconnection - Panasonic KX-TA624 Installation Manual

[210]-[211]

[210] DTMF Time

Assigns the minimum duration of a DTMF signal sent to an exchange line which is set to the
DTMF mode in program [401] "Dial Mode".
MODE 1: 80 milliseconds
MODE 2: 160 milliseconds
2
Default

[211] No Dial Disconnection

Enables or disables disconnecting an exchange line if an extension user does not dial
anything within 20 seconds after an exchange line is seized.
2
Default
• The interdigit timer assigned in program [208] "Interdigit Time" applies until the call
!
!
barring check is completed. When the timer expires, an outgoing outside call will be
disconnected while dialling, if "Enable" was selected in this program.
• Feature Reference
Section 3, Features
Call Barring
4-30
System Programming
1 0
NEXT
(MODE1/
MODE 1
1
1
NEXT
(Enable/
Enable (Disconnect)
4.2 System Programming
STORE
SELECT
MODE2)
STORE
SELECT
Disable)
END
END