Recall Timing Range Selection; Interdigit Time - Panasonic KX-TA624 Installation Manual

4.2 System Programming

[207] Recall Timing Range Selection

Sets the hookswitch recall time range sent from an extension to the system.
MODE 1: 50 to 180 milliseconds.
MODE 2: 80 to 180 milliseconds.
MODE 3: 80 to 650 milliseconds.
MODE 4: 80 to 1000 milliseconds.
MODE 5: 200 to 1000 milliseconds.
2
Default
• Feature Reference
Section 3, Features
Recall Button on a Single Line Telephone

[208] Interdigit Time

Assigns the maximum time allowed between digits for an outgoing outside call.
2
Default
• The interdigit timer applies until the call barring check is completed. When the timer
!
!
expires, an outgoing outside call will be disconnected while dialling, if "Enable" was
selected in program [211] "No Dial Disconnection".
• For a single line telephone, an outgoing outside call will be released from a DTMF
receiver when the interdigit timer expires.
• Feature Reference
Section 3, Features
Call Barring
0
7
NEXT
(MODE1/MODE2/
MODE3/MODE4/
MODE5)
MODE 1
0 8
NEXT
(5/10/15/20 sec)
20 seconds
STORE
SELECT
STORE
SELECT
[207]-[208]
END
END
System Programming
4-29