Exchange Line Connection Assignment; Dial Mode - Panasonic KX-TA624 Installation Manual

[400]-[401]

[400] Exchange Line Connection Assignment

Assigns which exchange line(s) is connected to the system or not.
4 0
* Exchange line number: 1 through 6 /
Default
• Feature Reference
Section 3, Features
Outside Calling

[401] Dial Mode

Selects the dialling mode, DTMF, Pulse or C. BLK (Call Blocking), for each exchange line.
DTMF: The dialling signals from an extension, either Tone or Pulse, are converted to
Pulse : The dialling signals from an extension, either Tone or Pulse, are converted to
C. BLK: If your Local Exchange can receive both DTMF and Pulse signals but the user
4
* Exchange line number: 1 through 6 /
Default
• Feature Reference
Section 3, Features
Pulse to Tone Conversion
4-44
System Programming
0 exchange line no.*
NEXT
All exchange lines – Connect
Tone and transmitted to the Local Exchange. If the system is connected directly
to the Local Exchange or installed behind a host PBX, which receives both Tone
and Pulse, select this mode.
Pulse and transmitted to the Local Exchange.
are contracted for Pulse, select this mode. When dialling with a touch tone
telephone, only Pulse signals are sent to the Local Exchange.
0 1
NEXT
exchange line no.*
All exchange lines – DTMF Mode
4.2 System Programming
or
PREV
NEXT
SELECT
(1···6/ )
(Connect/
Not connect)
SELECT
(All exchange lines)
or
PREV
NEXT
SELECT
(1···6/ )
(DTMF/Pulse/
C.BLK Mode)
SELECT
(All exchange lines)
To continue
STORE END
To continue
To continue
STORE END
To continue