Pause Time - Panasonic KX-TA624 Installation Manual

4.2 System Programming
!
• You must select "DISA1"when the optional OGM/FAX Detection card is not installed and
!
if you want to use the internal DISA.
• When you select "UCD", assign program [520] "UCD Group" to determine which
extension group is assigned to the UCD group.
• When you select "DISA1", "DISA2" and/or "UCD", assign program [502] "OGM Mode
Selection" to determine which OGM will be used.
• Feature References
Section 3, Features
Direct In Line (DIL), Direct Inward System Access (DISA),
Outgoing Message (OGM), Uniform Call Distribution (UCD)

[417] Pause Time

Assigns the length of the pause time. The programmed pause time is automatically inserted
after a line access code, a host PBX access code programmed in [403] "Host PBX Access
Codes" or a pause code assigned in [311] "Automatic Pause Insertion Codes" or can be
manually inserted by the user using the PAUSE button.
4
* Exchange line number: 1 through 6 /
Default
• Feature Reference
Section 3, Features
Host PBX Access
1 7
exchange line no.*
NEXT
All exchange lines – 1.5 seconds
or
PREV
NEXT
SELECT
(1.5/2.5/
(1···6/ )
3.5/4.5 sec)
SELECT
(All exchange lines)
[414]-[417]
To continue
END
STORE
To continue
System Programming
4-51