4.2
System Programming
[362] ARS Dial Tone Pattern Selection
Selects the dial tone pattern, Disable (no tone), Tone1, Tone2 or Tone3, generated after
seizing an ARS outside (CO) line. The ARS feature is enabled on an outside (CO) line basis
in program [350] "ARS Selection". The tone will stop after the first digit (except for an
account code) is dialed.
Tone1:
Tone2:
Tone3:
3
Default
• Feature Reference
Section 3, Features
Automatic Route Selection (ARS)
[363] ARS Interdigit Time
Assigns the interdigit timer (in seconds) used while the system is checking the dialed
number for the ARS feature.
3
Default
!
!
• This assignment should be the same as the interdigit timer assigned in program [208]
"Interdigit Time".
• Feature Reference
Section 3, Features
Automatic Route Selection (ARS)
1 s
6
2
NEXT
(Disable/Tone1/
Tone1
6
3
NEXT
5 seconds
STORE
SELECT
Tone2/Tone3)
time
STORE
(1···20)
[362]-[363]
END
END
System Programming
4-41