Dtmf Time - Panasonic KX-TA308 Installation Manual

4.2 System Programming

[210] DTMF Time

Assigns the minimum duration of a DTMF signal sent to an outside (CO) line which is set to
the DTMF mode in program [401] "Dial Mode".
MODE 1: 80 milliseconds
MODE 2: 160 milliseconds
2
Default
[211] No Dial Disconnection
Enables or disables disconnecting an outside (CO) line if an extension user does not dial
anything within 10 seconds after an outside (CO) line is seized.
2
Default
• The interdigit timer assigned in program [208] "Interdigit Time" applies until the toll
!
!
restriction check is completed. When the timer expires, an outgoing outside call will be
disconnected while dialing, if "Enable" was selected in this program.
• Feature Reference
Section 3, Features
Toll Restriction
1 0
NEXT
MODE 1
1 1
NEXT
Disable (Does not disconnect)
STORE
SELECT
(MODE1/
MODE2)
STORE
SELECT
(Enable/
Disable)
[210]-[211]
END
END
System Programming
4-31