Removing The Service Station - HP 200 Service Manual

Removing the Service Station

In performing this procedure, be carefu to
avoid staining your hands and c othing
with ink deposited in the service station.
1 Remove the window D page 6 15.
2 Remove the center cover D page 6 16.
3 Remove the left endcover D page 6 18.
4 Move the cartridge carriage to the center
of its travel.
6 Loosen the two screws that attach the
encoder strip bracket to the
service station assembly, until tension
can be relieved on the encoder strip, and
it can be detached from the bracket.
Encoder strip
Bracket
1
C3187 90000
5 Remove the nut and washer that attach
the encoder strip to the encoder strip
bracket.
Cartridge carriage
7 Remove the encoder strip bracket from
the service station.
2
1
5.5 mm
Removal and Replacement 6 57