HP 200 Service Manual page 20

Source Voltage Requirements:
Frequency:
Consumption:
The ac power outlet (mains) must have a protective
W A R N I N G
earth (ground) terminal. Serious shock hazard leading
to death or injury may result if the plotter is not
properly grounded.
'
'
Serial (RS 232 C) Interface
Parallel (Bi Tronics/Centronics) Interface
'
'
'
Power Requirements
Voltage
100 V ac
120 V ac
220 V ac
240 V ac
47-53 Hz and 57-63 Hz
140 watts maximum
w Choosing an interface cable
w Input/Output Interfaces
w Interface specifications
Max current (rms)
1.4 A
1.2 A
650 mA
600 mA