HP 200 Service Manual page 115

16 Remove the encoder strip spring.
18 Disconnect the trailing cable connector from the cartridge carriage PCA.
C3187 90000
17 Remove the double pulley from the
Y drive bracket. While doing this keep
the palm of one hand beneath the double
pulley to catch the double pulley
bushing.
Bracket
Double pulley
Bushing
0D2 DmbtinJ: Don't orgHt thH bushing.
Also, HnsurH that thH bHlt is corrHctly
positionHd around thH carriagH motor
gHar and thH lowHr part o thH doublH
pullHy.
Cartridge-carriage PCA
Trailing-cable connector
Removal and Replacement
Washer
6 51