Removing the Memory Module ,DRAM SIMM.
The user may have installed an optional DRAM SIMM in the plotter. Perform the following
procedure, if you need to remove it:
1 Read ESD Precautions D page 6 2.
2 Remove the electronics enclosure
cover D page 6 5.
4 While pushing the two metal springs
apart at the ends of the slot, tilt the outer
edge of the DRAM SIMM downwards.
C3187 90000
3 Locate the DRAM SIMM slot at the
bottom of the main PCA.
5 Once the DRAM SIMM is released from
the springs, gently pull it clear of the slot.
Removal and Replacement
Slot for
DRAM SIMM
6 7