Menu Chart - Mitsubishi Electric DX-TL5000E Installer Manual

Menu chart

Menu chart
You can set the basic settings for this unit in the menu settings.
Some of the menu settings cannot be changed during playback, recording, or stand-by mode for pre-alarm recording.
User Menu
User Menu (100 000 000)
1
Search
2
Copy
3
Information
D
Next
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
30
1 Select Source Device
2 Search by Time and Date
3 Search by Alarm List
D Alarm List
4 Find data storage location
D Search (Device Search List)
5 Search by Book Mark
6 Search by Motion
B Next > (Motion Detection Settings) 116 B00 000
A + D Go
E Exit
1 Copy Data to Copy A Drive
1 Start/End + 2 Set >
1 Start + 2 Set >
1 End + 2 Set >
2 Copy Data to Copy B Drive
1 Start + 2 Set >
1 Continue + 2 Set >
3 Set Copy A Drive
4 Set Copy B Drive
E Exit
1 Main Storage Memory Information
2 Copy A Drive Information
3 Copy B Drive Information
E Exit
Proceeds to Setup Menu.
111 000 000 Selects the device to be played back/searched.
112 000 000 Searches the desired picture by specifying the time and
date.
113 000 000 Searches the desired picture from the alarm list
registered at the start of alarm recording.
113 D00 000 Displays the list of alarm recording.
114 000 000 Detects the device which is used for recording by
inputting the recorded period.
114 D00 000 Displays the list of devices used to record for the
specified time period.
115 000 000 Searches the desired picture by specifying a bookmark
registered.
116 000 000 Searches camera picture with motions by using motion
detection function during playback.
Sets the condition for motion detection.
–––––––––– Sets the motion detection area manually.
Exits the Search menu.
121 000 000 Copies the necessary data to copy A device by specifying the
start and end points of the data to be copied. (for short period)
121 2SE 000 Specifies the start and end points to be copied.
121 2S0 000 Specifies only the start point of the copy.
121 2E0 000 Specifies only the end point of the copy.
122 000 000 Copies the necessary data to copy B device by specifying
only the start point of the data to be copied. (for long term)
122 2S0 000 Specifies the start point of the copy.
122 2C0 000 Copies the data from the end point of the previous copy.
123 000 000 Specifies the condition for copying the recorded picture to
copy A device.
124 000 000 Specifies the condition for copying the recorded picture to
copy B device.
Exits the Copy menu.
131 000 000 Shows the recorded range of each area in the main
device.
132 000 000 Shows the recorded range of each group in copy A
device.
133 000 000 Shows the recorded range of each group in copy B
device.
Exits the Information menu.