Memory; Add/Remove Hdd Device; Notes For Using The External Device - Mitsubishi Electric DX-TL5000E Installer Manual

Memory

Add/Remove HDD Device

This item is used to set the HDDs for main or copy device.
System Menu
5 Memory
Add/Remove HDD Device
1
1 Internal HDD
External HDD (USB HDD)
2
External HDD (SCSI HDD)
3
4 External HDD (NAS HDD)
1. Make sure that the internal HDDs connected are
step
displayed in the screen of <Internal HDD>.
• Internal A to C indicate the internal device number.
2. Add or remove the internal HDDs for setting the main
step
device.
Main: Registers for the main device. The numbers
01 to 03 indicate the recording order.
Free: Does not registered as the main device.
• The button changes between "Main" and "Free"
each time you press the button.
3. Make sure that the USB HDDs connected are
step
displayed in the screen of <External HDD (USB
HDD)>.
• When the "SB:" button of the desired ID number
is pressed, the access LED on the device
illuminates and you can check the corresponding
HDD which is connected to the SERIAL BUS port.
4. Add or remove the USB HDD for setting the main or
step
copy device.
Main: Registers for the main device. The numbers
indicate the recording order.
CopyA: Registers for the copy A device. The
numbers indicate the recording order.
CopyB: Registers for the copy B device. The
numbers indicate the recording order.
Free: Does not registered as the main or copy
device.
• The button changes in the order of "Main,"
"CopyA," "CopyB," and "Free" each time you
press the button.
5. Make sure that the SCSI HDDs connected are
step
displayed in the screen of <External HDD (SCSI
HDD)>.
• When the "SCSI:" button of the desired ID number
is pressed, the access LED on the device
illuminates and you can check the corresponding
HDD.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
6. Add or remove the SCSI HDD for setting the main
step
or copy device.
Main: Registers for the main device. The numbers
indicate the recording order.
CopyA: Registers for the copy A device. The
numbers indicate the recording order.
CopyB: Registers for the copy B device. The
numbers indicate the recording order.
Free: Does not registered as the main or copy
device.
• The button changes in the order of "Main,"
"CopyA," "CopyB," and "Free" each time you
1, 2
steps
press the button.
7. Make sure that the NAS HDDs connected are
step
3, 4
steps
displayed in the screen of <External HDD (NAS
HDD)>.
• The NAS number and the IP address set in the
5, 6
steps
<LAN A (NAS) Setting> are shown on the screen.
8. Add or remove the NAS HDD for setting the copy
step
7, 8
steps
device.
CopyA: Registers for the copy A device. The
numbers indicate the recording order.
CopyB: Registers for the copy B device. The
numbers indicate the recording order.
Free: Does not registered as the copy device.
• The button changes between "CopyA," "CopyB,"
and "Free" each time you press the button.
• The available device to be set as the copy A device
are:
HDD, DVD-R, DVD-RW, CD-R, CD-RW, USB
memory, and NAS.
The available device to be set as the copy B device
are:
HDD, DVD-RW, DVD-R, and NAS.
• Consult your dealer about NAS and SCSI devices
supported.
• The copied data is transmitted in 2 MB units. The copy
of up to 2 MB of the latest data may be delayed. Be
careful when changing the copy device.
• The maximum number of devices connected to serial
bus is 16 including the built-in DVD. This is the total
number of devices for main memory, copy A, and copy
B.
• The maximum number of SCSI devices used at the
same time is 6. Attach the optional board to connect
the SCSI devices.
• The order of the main device used for recording is:
internal HDD

• Notes for using the external device

The various external HDDs can be connected to this unit
in order to expand the memory or use as the copy device,
however, when you record or playback at high rate, the
picture may be missed during recording or playback
depending on the external device connected due to the
delay of the data transfer rate or respond of the external
device.
Check the operation before the actual operation.
System Menu
USB HDD SCSI HDD.
73