Restore; Restore Data To Main Hdd From Drive A/B/ Export Drive A/B Configuration - Mitsubishi Electric DX-TL5000E Installer Manual

Restore

Restore Data to Main HDD from Drive A/B/
Export Drive A/B Configuration
This item is used to restore the data in the copy device to
the main device.
System Menu
4 Restore
Restore Data to Main HDD from Drive A/B
1
2
Range of Restore
Export Drive A/B Configuration
2
1. Set the camera number to be restored.
step
• The button function changes between "All Off"
and "All On" each time you select this button. You
can switch on and off for all the cameras easily
by using this button.
2. Set the other detailed settings.
step
From Device: Sets the device which contains the
data to be restored.
Group: Sets the group which contains the data to
be restored.
To Main: Sets the area to which the data is restored.
Overwrite: Selects whether to overwrite the existed
data or not.
3. Set the start, start/end, or end points of restoring.
step
Start: Sets only the start point of restoring.
Start/End: Sets the start and end points of restoring.
End: Sets only the end point of restoring.
• To restore the data from the oldest data, select
"Set Start Time." To restore the data to the latest
data, select "Set End Time."
4. Select "Execute."
step
• Restoring starts.
• The restoring cannot be performed during recording.
• The picture data is administrated in 2 MB unit.
Therefore the data is restored in 2 MB unit from the
start point of the designated range when restoring.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
72
4
step
3
step
1, 2
steps
System Menu