On Screen Display Setting; On Screen Information; Camera Title; Recorder Title - Mitsubishi Electric DX-TL5000E Installer Manual

On Screen Display Setting

On Screen Information

This item is used to set the display mode and the location
for the clock, triplex, and camera display.
Setup Menu
4 System
6 On Screen Display Setting
(Clock)
1. Select the display mode of the clock.
step
Mode 1:
01-01-2004 Thu 00:00:00
Mode 2:
01-01-2004 Thu
00:00:00
Mode 3: Does not display the clock.
2. Select the desired clock location.
step
(Triplex)
3. Select the display mode of the remaining capacity
step
and the operational conditions such as playback,
recording, alarm recording, and emergency
recording.
Mode 1: Displays the operational condition of the
unit and the warning display.
Mode 2: Displays the remaining capacity of the
specified device, the operational condition of the
unit, and the warning display.
Mode 3: Displays the remaining capacity of the
specified device, the operational condition of the
unit, the HDD being used for playback or recording,
and the warning display.
Mode 4: Displays the warning display.
Mode 5: Displays nothing.
4. Select the desired display location.
step
(Camera)
5. Select the display mode of the camera information.
step
Number: Displays the camera number.
Title: Displays the title set in "Camera Title." The
title can be recorded along with the picture.
None: Displays nothing.
6. Select the desired display location.
step
Display mode example

Recorder title

REM 20%
Remaining capacity of the specified device
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
1 On Screen Information

Camera title

(during single screen display)
Warning
CAMERA1
RECORDER1 ALERT
REC [A] PLAY [ID:1] COPYA
Specified device
Specified device
Operational conditions
Camera Title
This item is used to set the titles of each connected camera
individually. When the display mode of the camera
information is set to "Title," the title, showing the location of
the camera, appears on the screen for an easy-to-
understand monitoring system.
• The camera titles can be input with a personal
computer by using the Web function. (
• Up to 16 characters can be used for the title. The
number of characters displayed on the screen is:
First 12 for the split 16 screen display
All 16 for the other screen display
Setup Menu
System
4
6 On Screen Display Setting
2
3
1. Set the camera number for which the camera title is
step
set.
2. Input the camera title by using the characters shown
step
on the bottom of the screen.
3. Display the preview screen to check the settings you
step
have set.
Recorder Title
This item is used to set the recorder title.
• The recorder title is displayed on the upper part of
the operational mode display.
• The recorder title can be input with a personal
computer by using the Web function. (
Setup Menu
System
4
6 On Screen Display Setting
1. Set the display mode of the recorder title.
step
On: Displays recorder title.
COPYB
Off: Does not display the recorder title.
2. Input the recorder title by using the characters shown
step
on the bottom of the screen.
Camera Title
Camera Title Overview
D Camera Title Overview
4 Recorder Title
page 99)
1, 2
steps
3
step
page 99)
65