User Registration - Mitsubishi Electric DX-TL5000E Installer Manual

Communications by Web Browser (continued)
• Certain items cannot be selected depending on what
the user authorization is.
• "Configuration" authorization can be used by only one
user. From the time that a user logs in until that user
logs out and gives up authorization, any other user
that logs in is regarded as a user who does not have
"Configuration" authority.
• "Playback" authorization can only be used by one user.
From the time that a user logs in until that user logs
out and gives up authorization, any other user that
logs in is regarded as a user who does not have
"Playback" authority.
2-2. (To change settings • • • )
Select "change" and left-click. The "[Change
Confirmation]" screen will appear.
2-3. If you want to make the change, left-click "change." If
you want to cancel a change, left-click "cancel."
2-4. (When you have selected "change" • • • )
The "[Completed]" screen will appear, so then left-click

"User Registration."

• The "[User Registration]" screen reappears.
2-5. (When you have selected "cancel" • • • )
• The "[User Registration]" screen reappears.
3-1. (To delete a registered user • • • )
Left-click on "remove" in the user ID that you want to
delete in "Change authorities of users."
• The "[Remove Confirmation]" screen appears.
3-2. If you want to delete it, left-click "remove." If you don't
want to delete it, left-click "cancel."
3-3. (If you have selected "remove" • • • )
The "[Completed]" screen will appear, so left-click
"User Registration."
• The "[User Registration]" screen reappears.
3-4. (If you have selected "cancel" • • • )
• The "[User Registration]" screen reappears.
4-1. (To register a new user • • • )
Enter the new user ID and new password in "Add New
User."
4-2. Refer to step 2-1, select the "Authority" desired and
check it.
• A user ID with the same name cannot be registered.
The maximum number of characters that can be used
in registering a password is 16. Both alphabet letters
and numbers can be used with a distinction made
between upper and lower case. You cannot use
spaces.
4-3. If you want to make a new registration, left-click
"register." If you want to cancel a new registration, left-
click "clear."
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
98
4-4. (If you have selected "register" • • • )
It will be added to "Change authorities of users."
4-5. (If you have selected "clear" • • • )
Clears the specified contents.
5-1. (To change the access method settings • • • )
Select the item to be changed in the "Access Mode
Setup."
• Use Keep-Alive:
Maintains the connection of TCP in order to speed
up the update of the live pictures, etc.
Uses keep-alive when the check mark is entered.
• Use SSL for Web Access:
Sets the level of the encryption function (SSL).
"No SSL": Does not use the encryption function.
"Menus only": Uses the encryption function for the
menus only.
"Menus + Pictures": Uses the encryption function
for the menus and pictures.
• SSL Port Settings:
Sets the port number used for SSL.
• Band-Width Limit:
Controls the band width of the communication. The
available setting items are "No Limit," "30Mbps,"
"20Mbps," "10Mbps," "7.5Mbps," "5Mbps," "3Mbps,"
"2Mbps," "1Mbps," "750kbps," "500kbps,"
"300kbps," "200kbps," "100kbps."
• When using SSL, the following message appears.
Select "Yes" and then continue the operation.
• When using keep-alive, the update speed of the
picture becomes faster, however, the number of the
users that can be connected at the same time is
restricted to 5.
5-2. Set the desired setting in "New Settings" and then
select "change" and left-click.