Password Setting; Simple Lock; Activating The Simple Lock; Releasing The Simple Lock - Mitsubishi Electric DX-TL5000E Installer Manual

System (continued)

Password Setting

This menu is used to set the password for the lock function.
This unit is equipped with 2 lock functions:
SIMPLE LOCK: Does not require to enter a password when
unlocking.
PASSWORD LOCK: Requires to enter a password when
unlocking.
• When the password for unlocking is not set, lock
function executes in SIMPLE LOCK.
• When the password for unlocking is set, lock
function executes in PASSWORD LOCK.
• When the MAIN switch on the rear panel is set to
OFF or when a menu is displayed, SIMPLE LOCK
and PASSWORD LOCK cannot be turned on/off.

SIMPLE LOCK

When SIMPLE LOCK is turned on, all the operations
become inoperable and the unit is locked in the current
mode.

• Activating the simple lock

1. Press the LOCK button while the MAIN switch is set
step
to ON.
• The lock turns on and the LOCK indicator lights
up.

• Releasing the simple lock

1. Press the LOCK button for more than 2 seconds.
step
• The lock is released and the LOCK indicator turns
off.

PASSWORD LOCK

There are 2 types of PASSWORD LOCK, "Operation
control" and "Disk management."
"Operation control" has 3 levels of lock (level 1 to 3).
"Disk management" (level 4) locks the settings of <Data
Clear> (System Menu Data Clear).
• Using "Operation control" of PASSWORD LOCK
(level 1 to 3)
1) Input the PASSWORD of levels 1 to 3.
2) Press the LOCK button to activate the PASSWORD
LOCK.
• The PASSWORD LOCK of level 1 turns on.
• When the PASSWORD LOCK of level 1 turns on, all
the operations except password lock release and help
are locked.
3) Unlock the PASSWORD LOCK of level 1.
• The PASSWORD LOCK of level 2 turns on.
• When the PASSWORD LOCK of level 2 turns on, only
the following buttons are operable.
• On the front of the unit: Camera number buttons,
buttons related to multiplexer and PTZ functions,
PLAY, STOP, REV. PLAY, PAUSE, SEARCH,
TRIPLEX PB, JOG dial, SHUTTLE ring
• On the remote controller: Buttons related to
playback and PTZ
• Mouse operations
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
58
4) Unlock the PASSWORD LOCK of level 2.
• The PASSWORD LOCK of level 3 turns on.
• When the PASSWORD LOCK of level 3 turns on, the
following operations are locked.
• Menu operations of <Setup Menu> and <System
Menu>
• On the front of the unit: POWER, REC/STOP, and
TIMER buttons
• On the remote controller: REC/STOP and TIMER
ON/OFF buttons
5) Unlock the PASSWORD LOCK of level 3.
• The PASSWORD LOCK of all the levels are
released.
• You can operate all the functions.
• PASSWORD LOCK can be unlocked even when the
MAIN switch on the rear panel is set to ON and the
POWER button on the front panel set to OFF.
When the password lock is turned on while the power
of this unit is turned off, use the LCD display on the
front panel to release the lock.
• To use the cascade function, activate the PASSWORD
LOCK of level 2 or higher for the slave recorders.

• Registering the PASSWORD

Register a 4-digit number for PASSWORD. When setting
the number of each digit, choose the number from 0 to 9.
Setup Menu
System
4
Password Setting
4
1 Level 1
2 Level 2
3
Level 3
Disk Management Password
4
(for the levels 1 to 3)
1 . Display the password setting screen of the desired
step
-1
level.
1 . Input 4 digits of the password by pressing the
step
-2
numbers on the screen.
• To input the password using the buttons on the front
panel, use the camera number buttons. 1 to 9 are
assigned to the camera number button 1 to 9, 0 is
assigned to the button 10.
Setup Menu
1-1 to 1-3
steps
2-1 to 2-2
steps