Mitsubishi Electric DX-TL5000E Installer Manual page 107

No Camera Signal
Camera signal is lost or distorted.
Please check the camera and cable
connection.
(NONE)
System suspended due to unstable
processing.
Restart the recorder.
(System suspended due to unstable
processing. Recording will be resumed.)
The alteration part is found in the data.
Recorder restarted due to technical problems
on the device.
The recorder has been rebooted. The problem
is not critical, but check the recorder.
Internal temperature is getting too high,
check the ventilation of the recorder.
Internal temperature is getting too high,
stop the operation of the recorder
immediately.
The fan of the recorder needs to be checked.
Copying data stopped because of new record
overwrites the old data.
New record will soon overwrite the old data
in copying.
Stop the recording, if you want to continue the
copying.
(NONE)
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Warnings and CALL OUT output
Warning Display
Cancelling
Countermeasure
the warning
Stop recording.
• Check whether the unit
and camera are properly
connected, and that electri
-city is on.
• Check whether the video Output video
signal is being properly signals.
outputted.
• Check to see if there is a Click "Clear
camera set for operation Warning" or
press the E
with no video signal input.
button.
• Continue the operation
when there is no
abnormality.
• When the error occurs
continuously, check the
HDD/media, cable and
termination and restart the
unit.
• Restart the unit. Click "Clear
Warning" or
press the E
button.
Click "Clear
Warning" or
press the E
button.
Click "Clear
Warning" or
press the E
button.
Click "Clear
• Check the unit.
Warning" or
press the E
button.
• Turn off the power and Click "Clear
change the installation Warning" or
press the E
condition.
button.
• Turn off the power and Click "Clear
Warning" or
change the installation
condition. press the E
button.
Lower the
temperature.
• Turn off the power and Click "Clear
Warning" or
stop using.
press the E
button.
Rotate the fan.
• Stop HDD recording to Click "Clear
continue copy/archive. Warning" or
press the E
button.
• Stop HDD recording to Click "Clear
Warning or
continue copy/archive.
• Stop copy/archive to press the E
button.
continue HDD recording.
• Restarts by watchdog
operation.
CALL OUT
Log number page
output
#1
Fixed 16
LOG54 #7
–
46-48,
89
None –
LOG13 #8
LOG23 #8
LOG33 #8
LOG43 #8
LOG73 #8
Selectable –
LOG14 #8
LOG24 #8
LOG34 #8
LOG44 #8
LOG74 #8
75
LOG5500 None
Selectable –
LOG6200
None –
LOG5100
–
LOG5200 Selectable
Fixed –
LOG5201
Fixed –
LOG5300
Fixed 42, 43
LOG3500#3
Fixed
LOG7500#4
Fixed 42, 43
LOG3600#3
LOG7600#4 Fixed
–
LOG5101 None
107