Audio Recording Setup; Recording - Mitsubishi Electric DX-TL5000E Installer Manual

Recording (continued)

Audio Recording Setup

This item is used to set the audio recording. This unit
simultaneously records audio along with the picture for
camera number 1 to 4. When recording audio, the
continuous recording time becomes shorter than when
recording only picture.
• Audio recording is available only when the optional
audio interface board DX-SC5 is attached to this unit.
Setup Menu
1

Recording

6 Audio Recording Setup
1. Set the audio recording setting for each channel, 1
step
to 4.
On: Records audio along with the picture.
2. Set the audio recording mode.
step
Normal: Records pictures and audio during
recording (normal, alarm, or emergency recording).
Alarm: Records pictures and audio during alarm
or emergency recording.
• Even if the "Audio Record" is set to "On," audio cannot
be recorded when the picture from the camera is not
set to be recorded. The audio to be recorded works
with as follows; camera number 1 with AUDIO IN 1
terminal, camera number 2 with AUDIO IN 2 terminal,
camera number 3 with AUDIO IN 3 terminal, camera
number 4 with AUDIO IN 4 terminal.
• When the recording mode changes from normal
recording to alarm recording, or from alarm recording
to normal recording, audio may be cut momently. This
is not a malfunction.
• When alarm area is set and "Audio Recording Mode"
is set to "Alarm," the audio is recorded in the alarm
area with the pictures. (
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
50
See pages 74 and 75.)
Setup Menu