Attaching Or Removing The Hdd; When Removing A Hdd - Mitsubishi Electric DX-TL5000E Installer Manual

Attaching or removing the HDD

Up to 3 HDDs can be mounted on this unit. The attaching,
removing and replacing method of the HDDs are as follows.
• Turn off the MAIN switch on the rear panel before
attaching or removing the HDD.
• When attaching multiple HDDs, attach in the order of
HDD A, B, and C.

When removing a HDD

1. Push the left end of each screw covers on both sides
step
of the cover to open.
• Do not leave the screw cover open for general use.
2. Remove the screws.
step
3. Remove the front covers.
step
• Remove the cover on the right side first.
• Then, push the left side cover to the right to
remove.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Connections
4. Remove the metal part.
step
• Remove 4 screws on the metal part.
5. Pull out the HDD tray halfway.
step
HDD A
6. Disconnect the cords.
step
7. Remove the HDD tray.
step
• Pull out the HDD tray completely.
8. Remove the HDD.
step
• Remove 4 screws which are used to fix the HDD
and its frame.
HDD B
HDD C
19