When Attaching A Hdd - Mitsubishi Electric DX-TL5000E Installer Manual

Connections (continued)

When attaching a HDD

1. Attach the new HDD onto the HDD tray with four
step
screws.
• Make sure to attach the HDD in the correct
direction.
• When attaching the additional HDD to HDD B or C,
use the supplied screws.
2. Insert the hard disk tray halfway.
step
3. Connect the cords.
step
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
20
4. Insert the hard disk tray completely.
step
5. Attach the metal part.
step
• Adjust the upper side first, then push the lower
side into the unit.
• Take care not to deform the springs.
6. Fix the metal part with four screws.
step
7. Attach the front covers.
step
• Attach the left side cover and push to the left.
• Then, attach the right side cover.
Spring