How To Set The Menus; Setting The Menus; How To Set A Menu With A Mouse; How To Set A Menu With Buttons On The Unit - Mitsubishi Electric DX-TL5000E User Manual

How to set the menus

Setting the menus

The operational conditions of this unit can be set in the menu screens. You can select and set the operational conditions
by using the buttons on the front panel or the mouse connected to this unit. In the menu screen, the numbers 1 to 16
(camera number buttons) and alphabets A to E (SPLIT screen buttons) show the button names on the front panel.
• When OUTPUT B is selected, the cursor of the mouse is displayed, however, the menu screen is not displayed and
cannot be set. The menus can be set only when the OUTPUT A is selected.

How to set a menu with a mouse

• Setting a mouse
• Setting a menu with a mouse
Left button

How to set a menu with buttons on the unit

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
6
Wheel
Right button
Mouse
M-DET
DOT ON/OFF
M-DET
AREA SET UP
1. Attach the supplied ferrite core to the cable of the
step
mouse as illustrated to the left.
1. Use the left and right buttons to set the menu.
step
• Click the left button to open the menu or select
a desired item, etc.
• Click the right button to select the active area
for motion detection.
• With this unit, the wheel on a mouse is not
available.
1. Use the SET UP button, camera number buttons,
step
and the SPLIT screen buttons (A to E) to set the
menu.
• Press the SET UP button to open the menu
screen.
• Press the camera number buttons (1 to 16) and
the SPLIT screen buttons (A to E) to open each
menu or select the desired item.