Acm Assembly - Lexmark MS310 Manual

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide

ACM Assembly

The hardware design of the ACM assembly in the integrated tray and input option are different. Below is a
side by side comparison:
Integrated Tray
Note that the removal procedure differs, and the ACM assembly found in the integrated tray is more
complex to replace than the one in the input option.
Other key differences:
Main Tray ACM Assembly
•
The pick tires are replaceable but not the pick rollers.
•
For the removal procedure, see "ACM Assembly Removal" under "550-sheet option tray
removals" in the printer's Service Manual.
Note: The removal procedure for the MS310, MS410, MX310 and MX410 Series is slightly
different from the rest of the models in this printer series.
Input Option ACM Assembly
•
The pick roller is now replaceable. You can easily replace it by just pressing the latches (refer
to the image above), and then sliding it to the left.
•
For the removal procedure, see "ACM Assembly Removal" under "Bottom removals" in
the printer's Service Manual.
Note: Always observe proper routing of cables to prevent obstructing the paper path and/or causing the
device to malfunction.
For Training Purposes Only
Input Option
78
Rev 1.3
4/21/2014