Low Insertion Force (Lif) Connector; How To Insert A Cable Into The Lif Connector - Lexmark MS310 Manual

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide

Low Insertion Force (LIF) Connector

Warning! When installing a cable into an LIF connector, care must be taken to avoid bending the
edges of the cables and damaging the contacts on the cables.

How to Insert a Cable into the LIF Connector

1. Look at the connector and take note as to which side the contacts are located.
2. Look at the circuit board - many boards will have the word "contacts" stamped on them to indicate
which side has the contacts.
3. Insert the cable squarely into the connector.
Note: Verify the cable is installed straight into the connector. If the cable is not installed properly,
then intermittent failures could occur.
For Training Purposes Only 89
Rev 1.3
4/21/2014