Lexmark MS310 Manual page 3

Lexmark MS31x/41x/510/610 & MX310/410/51x/61x Product Study Guide
Revision Information:
4/7/2014 – Three new models added to the printer family. These are the MS312, MS315, and the
MS415. Serviceability is identical to the existing models that were announced in the fall
of 2012. Revision 2.0 of this Study Guide incorporates the new printer information into
the guide.
Edition: April 2014
Revision: 2.0
The following paragraph does not apply to any country where such provisions are inconsistent with local
law: LEXMARK INTERNATIONAL, INC. PROVIDES THIS PUBLICATION "AS IS" WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore,
this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically
made to the information herein; these changes will be incorporated in later editions. Improvements or
changes in the products or the programs described may be made at any time.
Comments may be addressed to Lexmark International, Inc., Services Training/008-2, 740 West New
Circle Road, Lexington, Kentucky 40550, U.S.A or e-mail at SVCTrain@Lexmark.com. Lexmark may use
or distribute any of the information you supply in any way it believes appropriate without incurring any
obligation to you.
References in this publication to products, programs, or services do not imply that the manufacturer
intends to make these available in all countries in which it operates. Any reference to a product, program,
or service is not intended to state or imply that only that product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe any existing intellectual property
right may be used instead. Evaluation and verification of operation in conjunction with other products,
programs, or services, except those expressly designated by the manufacturer, are the user's
responsibility.
Lexmark, Lexmark with diamond design, and MarkNet are trademarks of Lexmark International, Inc.,
registered in the United States and/or other countries.
PCL® is a registered trademark of the Hewlett-Packard Company.
All other trademarks are the property of their respective owners.
© 2014 Lexmark International, Inc. All rights reserved.
UNITED STATES GOVERNMENT RIGHTS
This software and any accompanying documentation provided under this agreement are commercial
computer software and documentation developed exclusively at private expense.
For Training Purposes Only
Rev 1.3
4/21/2014