Dell Power Supply C8000 Owner's Manual page 121

Table 2-1. D4 Token Table
Token Setup Option
0052 N/A
0053 N/A
0054 N/A
005C N/A
005D N/A
006E Embedded NIC1 Enables the onboard NIC1 controller, but disables the
0087 Video
Enumeration
0088 Video
Enumeration
008C Embedded USB
Controller
008D Embedded USB
Controller
00A1 Restore on AC
Power Loss
00A2 Restore on AC
Power Loss
00A3 Restore on AC
Power Loss
00BA Embedded NIC2 Disables the onboard NIC2 controller.
(continued)
Description
For the next system boot, set the IPL priority to: hard
disk then option ROMs (if the devices are available).
For the next system boot, set the IPL priority to:
Network, hard disk, RAID,USB storage, CD/DVD-
ROM (if the devices are available).
For the next system boot, set the IPL priority to:
CD/DVD-ROM, USB Storage, hard disk, RAID,
Network (if the devices are available).
Enables BIOS remote update on the next reboot, to
search for an operating-system initiated BIOS update
image.
Disables BIOS remote update on the next reboot, to
search for an operating-system initiated BIOS update
image.
NIC associated PXE or RPL boot-ROM.
Allows BIOS to use the onboard video controller for
boot-time messages.
Allows BIOS to use the first add-in video controller for
boot-time messages. Depending on the BIOS search
order and system slot layout.
Allows BIOS to enable the built-in USB controller at
system startup.
Allows BIOS to enable the built-in USB controller at
system startup.
System remains off until the power button is pressed.
System reverts to the last power state before power
loss.
System switches back on after the AC power loss.
Using the System Setup Program
121