Dell Power Supply C8000 Owner's Manual page 136

Table 2-1. D4 Token Table
Token Setup Option
4854 Maximum
Payload Size
4855 Maximum
Payload Size
4856 Maximum
Payload Size
4857 WHEA Support
4858 WHEA Support
4859 NIC
Enumeration
485A NIC
Enumeration
485B PCIe Generation Sets the PCI signaling rate at Gen3 8.0 Gigabits
485C PCIe Generation Sets the PCI signaling rate at Gen2 5.0 Gigabits
485D PCIe Generation Sets the PCI signaling rate at Gen1 2.5 Gigabits
485E Reboot on WOL
(ROW)
485F Reboot on WOL
(ROW)
4860 USB PORT with
BMC
136
Using the System Setup Program
(continued)
Description
Auto detects the PCIe maximum payload size.
Sets the PCIe maximum payload size to 128 Bytes.
Sets the PCIe maximum payload size to 256 Bytes.
Disables Windows Hardware Error Architecture.
Enables Windows Hardware Error Architecture.
Sets PXE boot from onboard NIC to Add-on NIC
adapter. (default)
Sets PXE boot from Add-on NIC adapter to onboard
NIC.
bandwidth.
bandwidth.
bandwidth.
Disables ROW. (default)
The ROW repurposes the Wake on LAN (WOL)
signal to reboot the system board when the system is
in S0/S3 state.
Enables ROW.
ROW repurposes the WOL signal to reboot the
system board when the system is in S0/S3 state. When
a WOL packet is received by the NIC, the wake up
signal generated by the NIC shall cause a hardware
reboot of the system board.
Allows you to electrically disable the internal USB port
which contacts to BMC.