Dell Power Supply C8000 Owner's Manual page 240

4 Attach the server enclosure(s) power cables to the PDU power bus bar.
NOTE:
The PDU device supports a maximum of five PowerEdge C8000 server
enclosures depending on the system configuration and power budget.
Secure the three black power cable lugs to the top power bus bar
a
(GND) with three screws. See Figure 4-16.
Secure the three yellow power cable lugs to the bottom power bus bar
b
(12 V) with three screws. See Figure 4-16.
For multiple server enclosures cable connection, see Figure 4-17.
c
Figure 4-16. Connecting a Single Server Enclosure to the PDU
1
7
1 screws (6)
3 power bus bar (12 V)
5 server enclosure
7 black power cables (3)
240
Rack Mount Configuration
6
2 power bus bar (GND)
4 PDU device
6 yellow power cables (3)
2
3
4
5