Dell Power Supply C8000 Owner's Manual page 128

Table 2-1. D4 Token Table
Token Setup Option
0257 2F8h/3F8h
025D Optimizer Mode Selects optimizer mode as the memory operating
025E Spare Mode
025F Mirror Mode
0260 Advanced ECC
Mode
026A Coherent HT
Link Speed
026B Coherent HT
Link Speed
026E Active Processor
Cores
026F Active Processor
Cores
0270 Active Processor
Cores
0271 Active Processor
Cores
0272 Active Processor
Cores
027B HT Assist
027C HT Assist
128
Using the System Setup Program
(continued)
Description
Sets the back serial port address to 0x2F8 and internal
serial port address to 0x3F8.
mode.
Selects spare mode as the memory operating mode.
Selects mirror mode as the memory operating mode.
Selects Advanced ECC (i.e. Lockstep, Chipkill) as the
memory operating mode.
Sets to support HyperTransport 1 specification.
Sets to support HyperTransport 3 specification.
This field controls the number of enabled all of cores
in each processor. By default, the maximum number
of cores per processor will be enabled.
This field controls the number of enabled 6 cores in
each processor. By default, the maximum number of
cores per processor will be enabled.
This field controls the number of enabled 8 cores in
each processor. By default, the maximum number of
cores per processor will be enabled.
This field controls the number of enabled 10 cores in
each processor. By default, the maximum number of
cores per processor will be enabled.
This field controls the number of enabled 12 cores in
each processor. By default, the maximum number of
cores per processor will be enabled.
Disables the Probe Filter chipset option in the System
setup. There are some applications that may lower
chipset performance when this is enabled.
Enables the Probe Filter chipset option in the System
setup. There are some applications that may lower
chipset performance when this is disabled.