Dell Power Supply C8000 Owner's Manual page 110

Option
ACPI SPMI Table
(Enabled default)
Set BMC LAN
Configuration
Remote Access
Configuration
Restore on AC Power Loss
(Power On default)
Power Staggering AC
Recovery
(Immediate default)
Power Button
(Enabled default)
View System Event Log
Event Logging
(Enabled default)
NMI on Error
(Enabled default)
110
Using the System Setup Program
Description
When enabled, BIOS enables Advanced Configuration
and Power Interface (ACPI) Service Processor
Management Interface (SPMI) table for IPMI driver
installation.
When disabled, BIOS disables the ACPI SPMI table
for BMC ROM update.
Press <Enter> to set the BMC network.
Press <Enter> to configure serial port settings related
to console redirection.
Select the power state when the AC power is back.
• Power Off: System remains off until the power button
is pressed.
• Last State: System reverts to the last power state
before power loss.
• Power On: System switches back on after the AC
power loss.
Set the time period for the system to turn back on from
an AC power loss once power is resumed.
• Immediate: Power On (No Delay)
• Random: Auto
• User Defined: User defined delay time.
When enabled, the power button can turn the system's
power off.
When disabled, the power button can only turn on
system power.
Press <Enter> to view the BMC system event log.
Enables or disables BIOS to log system events.
Enables or disables BIOS to generate an Non-masked
Interrupt (NMI) when an uncorrectable PCI Express
error occurs.