Connecting The Pdu To The Network; "Connecting The Pdu To The Network - Dell Power Supply C8000 Owner's Manual

Connecting the PDU to the Network

1 Install the power management controller (PMC) board into the PDU.
Unpack the PMC kit.
a
Slide the PMC board into the PMC tray. See Figure 4-19.
b
Secure the PMC board to the PMC tray with the four screws.
c
See Figure 4-19.
Figure 4-19. Installing the Power Management Controller Board
1 power management controller (PMC) board
3 PMC tray
1
2 screws (4)
Rack Mount Configuration
2
3
243