System Settings - Dell Power Supply C8000 Owner's Manual

System Settings

Option
System Date
System Time
Product Name
BIOS Version
BIOS Build Date
Service Tag
Asset Tag
MRC Version
ME Version
BMC Version
FAN Control Board FW Displays the Fan Controller Board (FCB) firmware
ePPID
NIC1 MAC Address
NIC2 MAC Address
BMC NIC MAC Address Displays the MAC address of the BMC management port.
Processor Type
Processor Speed
Description
Scroll to this item to adjust the date. Use <Enter>,
<Tab> or <Shift><Tab> to select a field. Use [+] or
[-] to configure system date.
Scroll to this item to adjust the time. Use <Enter>,
<Tab> or <Shift><Tab> to select a field. Use [+] or
[-] to configure system time.
Displays the system product name.
Displays the BIOS version.
NOTE:
Check this version number when updating BIOS from
the manufacturer.
Displays the date the BIOS was created.
Displays the system service tag number. The service tag
field should match what is physically on the service tag of
the system.
Displays the system asset tag number.
Displays the Memory Reference Code (MRC) firmware
version.
Displays the Manageability Engine (ME) firmware
version.
Displays the Baseboard Management Controller (BMC)
firmware version.
version.
Displays the information from Electronic Piece Part
Identification (ePPID) label.
Displays the Media Access Control (MAC) address for the
NIC1 connector.
Displays the MAC address for the NIC2 connector.
Displays the processor type.
Displays the current speed of the processor.
Using the System Setup Program
75