Dell Power Supply C8000 Owner's Manual page 102

iSCSI Remote Boot
Select iSCSI Remote Boot in the Embedded NIC1/NIC2 option and press
<Enter> to view the following screen.
iSCSI Remote Boot
Option
iSCSI Initiator Name
Enable DHCP
(Disabled default)
Initiator IP Address
Initiator Subnet Mask
Gateway
Target Name
Target IP Address
102
Using the System Setup Program
Description
Displays the worldwide unique name of the initiator.
NOTE:
Only iqn format is accepted.
Enables or disables the DHCP network settings.
Sets the initiator's static IP address.
Sets the subnet mask for the static IP address.
Sets the IP gateway for the static IP address.
Sets the name for the target IP .
Sets the target's IP address.