Dell Power Supply C8000 Owner's Manual page 140

Table 2-1. D4 Token Table
Token Setup Option
48B5 Memory
Operating Voltage
48C0 Frequency Ratio
48C1 Frequency Ratio
48C2 Frequency Ratio
48C3 Frequency Ratio
48C8 QPI Frequency
48C9 QPI Frequency
48CA QPI Frequency
48CB QPI Frequency
48CC QPI Frequency
48CD QPI Frequency
48D0 Energy Efficient
Policy
48D1 Energy Efficient
Policy
48D2 Energy Efficient
Policy
48D3 Direct Cache
Access
48D4 Direct Cache
Access
48D8 Load Customized
Defaults
140
Using the System Setup Program
(continued)
Description
Indicates all DIMMs in the system are operating at
1.25 volts.
Sets frequency multiplier as maximum level.
Downgrades frequency multiplier one level.
Downgrades frequency multiplier two levels.
Downgrades frequency multiplier three levels.
Sets the QPI frequency runs at maximum speed.
Sets the QPI frequency runs at 4.800GT.
Sets the QPI frequency runs at 5.866GT.
Sets the QPI frequency runs at 6.400GT.
Sets the QPI frequency runs at 7.200GT.
Sets the QPI frequency runs at 8.000GT.
Controls the energy efficient policy as performance
profile to configure all necessary settings. This option
is supported for processor power management that is
independent of the entire OS.
Controls the energy efficient policy as balance profile
to configure all necessary settings. This option is
supported for processor power management that is
independent of the entire OS. (default)
Controls the energy efficient policy as low power
profile to configure all necessary settings. This option
is supported for processor power management that is
independent of the entire OS.
Disables the Direct Cache Access.
Enables the Direct Cache Access.
Requests a customized default of SETUP values on
the next boot.